GT 80G ver.1

EFFICIENT

GT 80G is a Full-Duplex microwave link operating in the 71-76 / 81-86 GHz license-free band. The GT 80G link can provide up to 3,7 Gbps throughput using 16 QAM modulation and 1250 MHz bandwidth.

SOLD OUT

Software upgrade up to 3,7 Gbps capacity with 1250 MHz channel size
Output power up to +23 dBm
1 x SFP+(10 Gbps interface), 1 x SFP, 1 x metallic port RJ-45, SFP/RJ-45
AATPC (Automatic Adaptive Transmit Power Control - when modulation is reduced, AATPC increases power to the maximum value for respective modulation)
Security and Access management, digitally encrypted transmitter
Advanced QoS Port-based and Bandwidth control Management
Optimal solution for Triple Play services with IPTV support
Supports IEEE 802.1Q VLAN (also QinQ)
Supports packet-flow control acc. to IEEE 802.3x
Power supply via Ethernet cable acc. to IEEE 802.3at
Power supply via separate cable (DC input 20 to 57V)
Automatic switching to backup power supply (PoE1, PWR)
Built-in spectral analyzer for searching for a free channel
Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
Configuration of radio link in Windows, Linux, Android, iOS (soon)
Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
Monitoring of device parameters in real time (input voltage, current, power ...)
Automatic detection of radio polarization
Direct installation of parabolic antenna

Benefits

High quality

High power

Full Outdoor

Channel size

Finely tuning

Latency

Asymmetric Bandwidth

Easy installation

Specifications


General RF
Frequency band	71-76 GHz / 81-86 GHz
Channel size	1250 MHz
Modulation	4 / 8 / 16 QAM
Frequency stability	± 50 ppm
Adaptive power TX	YES
ATPC	YES
ACM	YES
AATPC	YES


Transmitter
Output power	+5 up to +23 dBm (± 2 dB)
APC (Autom. Power Control)	YES
APCmin, APCmax	YES
Regulace APC on RSSI	YES


Transmission rate (500 MHz channel)
Capacity of radio [Mbps]	Modulation	Power [dBm]	Sensitivity for BER 10-6 [dBm]
3650	16 QAM	18	-56
2737	8 QAM	18	-60
1825	4 QAM	23	-65


Antennas
Type	Diameter [cm]	Gain [dBi] / [GHz]	Gain [dBi] / [GHz]
ANT 80B35 - C3	35	45 / 71	46 / 86
ANT 80B65 - C3	65	50 / 71	51 / 86

Consumption max. 5W on ports SFP/SFP+
Interface
Port 1 (SFP1)	1000Base-T/1000Base-SX/1000Base-LX (SFP)
Port 2 (ETH1)	1000Base-T (RJ-45 including PoE)
Port 3 (SFP2+)	10GBase-SR/10GBase-LR/1000Base-T (SFP+)
Port 4 (PWR)	DC napájení 30-57 V
Port 5 (SFP3)	1000Base-SX/1000Base-LX (SFP)


Management
GUI	Summit Management System (Windows, Linux-Wine)
MUI	Summit Tools (Android, iOS)
SNMP	v2c, MIB soubor


Mechanical
Mechanical concept	Full Outdoor
Dimension	145 mm x 240 mm x 240 mm
Weight	3,5 kg

* In power supply port of device
Power supply / Cable
Power Over Ethernet	IEEE 802.3bt (36-57 VDC) *
DC port	30-57 VDC *
Consumption	up to 35W
Consumption including all SFP/SFP+ ports	up to 40W
Ethernet cabel	outdoor FTP CAT5e up to 100 m


Environmental
Operational temperature	-20°C to 50°C
Ingress Protection	IP-67


Compliance
IEEE 802.1q	VLAN tagging
IEEE 802.ad	QinQ
IEEE 802.3x	Flow Control
RFC2544	YES

Antennas

ANT 80B35-C3

71 - 86 GHz
Diameter 35 cm
Gain 45 dBi for 71 GHz
Gain 46 dBi for 86 GHz
Weight 2,5 kg
Compliance ETSI EN 302 217 Class3
ANT 80B65-C3

71 - 86 GHz
Diameter 65 cm
Gain 50 dBi for 71 GHz
Gain 51 dBi for 86 GHz
Weight 7,5 kg
Compliance ETSI EN 302 217 Class3

Video

Accessories

SET 1

(for Eth1, Eth2, PWR)
SET structure:
1x output
2x rubber seal
SET 2

(for SFP1, SFP2)
SET structure:
1x output
3x rubber seal
PLUG

(for Eth1, Eth2, SFP1, SFP2, PWR)
Plug structure:
1x plug
1x rubber "O" ring

3,7Gbps, +23 dBm, SFP+