The Radio also includes advanced Ethernet settings. It is designed as a Full Outoor Unit (unit L and H) with direct mounting to a parabolic antenna. These properties give service providers great flexibility and speed in building up their networks. Top-quality components and durable cast-aluminium design allows the radio link to be used in very difficult climatic conditions.
This PtP technology has been developed and manufactured by SUMMIT DEVELOPMENT, an established Czech manufacturer of microwave links, at their own software digital radio.
- Software upgrade up to 3Gbps capacity with 1000 MHz channel size
- Output power up to +23 dBm
- 1 x SFP+(10 Gbps interface), 1 x SFP
- The device does not contain RJ-45 (metallic), if necessary, an SFP to RJ-45 converter is needed (CISCO GLC-T Compatible 1000Base-T SFP Copper RJ-45 Transceiver Module)
- AATPC (Automatic Adaptive Transmit Power Control - when modulation is reduced, AATPC increases power to the maximum value for respective modulation)
- Security and Access management, digitally encrypted transmitter
- Advanced QoS Port-based and Bandwidth control Management
- Optimal solution for Triple Play services with IPTV support
- Support IEEE 802.1Q VLAN (also QinQ)
- Support packet-flow control acc. to IEEE 802.3x
- Power supply via separate cable (DC input 30 to 57V)
- Built-in spectral analyzer for searching for free channel
- Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
- Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
- Monitoring of device parameters in real time (input voltage, current, power …)
- Direct installation of parabolic antenna
Benefits
High quality
High power
Full Outdoor
Channel size
Finely tuning
Latency
Asymmetric Bandwidth
Easy installation
Specifications
GT 80G ver.2
3 Gbps, +23 dBm, SFP+
General RF | |
---|---|
Frequency band | 71-76 GHz / 81-86 GHz |
Channel size | 1000 MHz |
Modulation | 4 / 8 / 16 QAM |
Frequency stability | ± 50 ppm |
Adaptive power TX | YES |
ATPC | YES |
ACM | YES |
AATPC | YES |
Transmitter | |
---|---|
Output power | +5 up to +23 dBm (± 2 dB) |
APC (Autom. Power Control) | YES |
APCmin, APCmax | YES |
Regulace APC on RSSI | YES |
Transmission rate (1000 MHz channel) | |||
---|---|---|---|
Capacity of radio [Mbps] | Modulation | Power [dBm] | Sensitivity for BER 10-6 [dBm] |
2920 | 16 QAM | 18 | -57 |
2190 | 8 QAM | 18 | -59 |
1460 | 4 QAM | 23 | -64 |
Antennas | |||
---|---|---|---|
Type | Diameter [cm] | Gain [dBi] / [GHz] | Gain [dBi] / [GHz] |
ANT 80B35 - C3 | 35 | 45 / 71 | 46 / 86 |
ANT 80B65 - C3 | 65 | 50 / 71 | 51 / 86 |
Interface | |
---|---|
Port SFP1 | 1000Base-T/1000Base-SX/1000Base-LX (SFP) |
Port SFP2+ | 10GBase-SR/10GBase-LR |
Port PWR | DC power supply 30-57 V |
Management | |
---|---|
GUI | Summit Management System (Windows, Linux-Wine) |
SNMP | v2c, MIB file |
Mechanical | |
---|---|
Mechanical concept | Full Outdoor |
Dimension | 145 mm x 240 mm x 240 mm |
Weight | 3,9 kg |
Power supply / Cable | |
---|---|
DC port | 30-57 VDC * |
Consumption | up to 35W (without SFP/SFP+) |
Environmental | |
---|---|
Operational temperature | -20°C to 50°C |
Ingress Protection | IP-67 |
Compliance | |
---|---|
IEEE 802.1q | VLAN tagging |
IEEE 802.ad | QinQ |
IEEE 802.3x | Flow Control |
RFC2544 | YES |
Antennas
-
ANT 80B35-C371 - 86 GHzDiameter 35 cmGain 45 dBi for 71 GHzGain 46 dBi for 86 GHzWeight 2,5 kgCompliance ETSI EN 302 217 Class3
-
ANT 80B65-C371 - 86 GHzDiameter 65 cmGain 50 dBi for 71 GHzGain 51 dBi for 86 GHzWeight 7,5 kgCompliance ETSI EN 302 217 Class3
Video
Accessories
-
SET 1
(for Eth1, Eth2, PWR)
SET structure:
1x output
2x rubber seal -
SET 2
(for SFP1, SFP2)
SET structure:
1x output
3x rubber seal -
PLUG
(for Eth1, Eth2, SFP1, SFP2, PWR)
Plug structure:
1x plug
1x rubber "O" ring