It is designed as a Full Outdoor Unit [ unit L and unit H (Low / High) ] with direct mounting to a parabolic antenna. The Link uses cross-polarization connection, therefore one side of the link must be installed in vertical polarization and the other side in horizontal polarization.
These properties give service providers great flexibility and speed in building up their networks. Top-quality components and durable cast-aluminium design allows the radio link to be used in very difficult climatic conditions.
- Software Defined Radio SUMMIT DEVELOMPENT (own modem)
- Transmission capacity up to 551 Mbps full duplex
- Unit L and H (Low / High)
- In case of failure automatically switches to a backup link
- Cross-polarization connection of radio
- FEC (Reed Solomon, Interleaving)
- 4 x Gigabit Ethernet port (2 x SFP, 2 x RJ45)
- Jumbo packet transfer of MTU size up to 2000 bytes
- Security and Access management, digitally encrypted transmitter
- Advanced QoS Port-based and Bandwidth control Management
- Optimal solution for Triple Play services with IPTV support
- Support IEEE 802.1Q VLAN (also QinQ)
- Support packet-flow control acc. to IEEE 802.3x
- Power supply via Ethernet cable acc. to IEEE 802.3at
- Power supply via separate cable (DC input 20 to 57V)
- Automatic switching to backup power supply ( PoE1, PoE2, PWR)
- Built-in spectral analyzer for searching for free channel
- Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
- Configuration of radio link in Windows, Linux, Android, iOS
- Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
- Monitoring of device parameters in real time (input voltage, current, power …)
- Automatic detection of radio polarization
- Direct installation of parabolic antenna
Benefits
High quality
High power
Full Outdoor
Channel size
Finely tuning
Latency
Asymmetric Bandwidth
Easy installation
Specifications
BT 17G v2 L/H
551 Mbps
General RF | |
---|---|
Frequency band | 17,1 - 17,3 GHz |
Channel size | 14 to 80 MHz |
Asymmetric Bandwidth | YES |
FEC | Reed-Solomon, Interleaving |
ACM | YES |
Frequency stability | ± 5 ppm |
Transmitter | |
---|---|
Output power TX | -25 to +10 dBm (± 1 dB)* |
APC (Autom. Power Control) | YES |
APCmin, APCmax | YES |
Regulation APC by RSSI | YES |
* +8 dBm with modulation 256 QAM | |
* +10 dBm with modulation 4-128 QAM |
Transmission capacity | ||||
---|---|---|---|---|
Bandwidth [MHz] | Modulation | Capacity of radio [Mbps] | Sensitivity for BER 10-6 [dBm] | Sensitivity for BER 10-9 [dBm] |
80 | 256 QAM | 551 | -61 | -59 |
80 | 128 QAM | 481 | -65 | -63 |
80 | 64 QAM | 413 | -68 | -66 |
80 | 32 QAM | 343 | -72 | -70 |
80 | 16 QAM | 275 | -75 | -73 |
80 | 4 QAM | 137 | -79 | -77 |
Antennas | ||
---|---|---|
Type | Diameter [cm] | Gain [dBi] |
ANT 17D35-C3 | 35 | 33 |
ANT 17D65-C3 | 65 | 38 |
ANT 17A90-C3 | 90 | 40 |
ANT 17A120-C3 | 120 | 42 |
User interface | |
---|---|
Eth1,Eth2 | 2 x 10/100/1000 Base-T |
SFP1, SFP2 | 2 x 1000Base-SX / 1000Base-LX |
GUI | SMS (Windows, Linux-Wine) |
WUI | SMS (Web browser, read-only) |
MUI | SMS (Android, iOS) |
Mechanical | |
---|---|
Mechanical concept | Full Outdoor |
Dimension | 145 mm x 240 mm x 240 mm |
Weight | 3,5 kg |
Power supply / cable | |
---|---|
Power Over Ethernet | IEEE 802.3at (PoE+) |
Separate DC power supply | 20-57 VDC |
Power consumption | up to 35 W |
Ethernet cable Outdoor | FTP CAT5e to 100 m |
Environmental | |
---|---|
Operational temperature | -20°C to 50°C |
Ingress protection | IP-67 |
Compliance | |
---|---|
IEEE 802.3 | 1000 Base-TX, 1000 Base-T |
IEEE 802.3az | Energy Efficient Ethernet |
IEEE 802.3x | Flow Control |
IEEE 802.1q | VLAN tagging, QinQ |
IEEE 802.3u | Auto-Negotiation protocol |
IEEE 802.3at | Power Over Ethernet plus |
Antennas
-
ANT 17D35-C317,1 - 17,3 GHzDiameter 35 cmGain 33 dBiWeight 2,5 kgCompliance ETSI EN 302 217 Class3
-
ANT 17D65-C317,1 - 17,3 GHzDiameter 65 cmGain 38 dBiWeight 9 kgCompliance ETSI EN 302 217 Class3
-
ANT 17A90-C317,1 - 17,3 GHzDiameter 90 cmGain 40 dBiWeight 20 kgCompliance ETSI EN 302 217 Class3
-
ANT 17A120-C317,1 - 17,3 GHzDiameter 120 cmGain 42 dBiWeight 35 kgCompliance ETSI EN 302 217 Class3
Video
Accessories
-
SET 1
(for Eth1, Eth2, PWR)
SET structure:
1x output
2x rubber seal -
SET 2
(for SFP1, SFP2)
SET structure:
1x output
3x rubber seal -
PLUG
(for Eth1, Eth2, SFP1, SFP2, PWR)
Plug structure:
1x plug
1x rubber "O" ring